 ## Hydraulic Press Brake

Factory Direct Sale Without Middleman

We have been manufacturing press brakes for nearly 20 years, and we are able to customize them according to the actual needs of our customers, regardless of their needs.

In order to ensure the quality, service life and processing accuracy of the press brakes, the main components of the machine are all international famous brands, such as Schneider, Rexroth, Siemens, etc.

At the same time, our press brakes are tempered and shot blasted, which most of our counterparts cannot do, and this is one of our advantages.

In addition, our professional after-sales team also allows you to use our machines without any worries.

# How to Calculate the Min Bending Edge of Sheet Metal

Table of Contents

## L Bending

1) Factors determining the minimum L bending

As the middle of the V groove is hollow, when forming, the edge fold must be longer than the hollow section and the specific landing edge size varies in the production of different companies (the lower section of V groove is under use for a long time, the R angle increases, which makes the scrap edge distance increases accordingly, otherwise, “sliding” will happen)

2) Reduction formula (empirical): 6T/2+0.5+(1.8T/2)

3) As the picture below shows, when T=1, K=1.8*1, the minimum L Bending is 3+0.5+0.9=4.4 V Groove/Thickness34567891012151618
0.52.53
0.83.23.74.2
13.544.555.5
1.23.544.555.5
1.54.85.25.86.26.8
27.58.5
31112
41516
5
1920
2224262830

## U Bending

1) U bending types

A. Regular forming by press brake punch

B. Gasket-reverse folding-hemming   (firstly bending to 30°, placing a suitable gasket in the middle and then hemming )

2) Factors determining the minimum U bending

• Shapes of punch (shown in the following picture).

Judging from common punch mold, the best one for U folding is “gooseneck punch” which has many types and specifically subject to the requirement of various companies.

• Bending size (shown in the following picture).

The increasing relation between two sizes：

The longer A is, the longer B is. 3Reduction formula (empirical value of gooseneck punch )

◆ 0.5MM sheet:

Minimum U bending: A =7.67, B= 0.5, minimum L bending=3.0

Increasing value: whenever A increases by 1mm, B increases 1.87 accordingly.

Formula: when A size is known, then B size=（A-7.67）/T*increasing value + the minimum L bending value of this plate

For example,

when A=15, then B=(15-7.67)/0.5*1.87+3.0=30.4

When B size is known, then A size=（B- the minimum L bending value of this plate）/increasing value *T+7.67

For example,

when B=30.4, then A=（30.4-3）/1.87*0.5+7.67=15

◆ 0.8MM sheet

Min U bending A size=8.5，B size=0.8, min L bending=4.2。

Increasing value:1.87/0.5*0.8=2.99

◆ 1.0MM sheet

Min U bending A size=8.94, B size =1.0, min L bending=4.5

Increasing value: 1.87/0.5*1.0=3.7

◆ 1.2MM sheet

Min U bending A size=9.3, B=1.2, min L bending=4.5

Increasing value: 1.87/0.5*1.2=4.5

◆ 1.5MM sheet

Min U bending A size=10.3, B= 1.5, min L bending=6.2

Increasing value: 1.87/0.5*1.5=5.5

◆ 2.0MM sheet

Min U bending A size=12.7, B= 2.0, min L bending=12.0

Increasing value: 1.87/0.5*2=7.4

Notes:

1. When A size exceeds 85.0MM and B size exceeds 60.0MM, this formula is inapplicable.

2. Attached table: A= test value, B= minimum L bending, K=test value

ThicknessA size (min)B size (min)K
0.57.6731.87
0.88.54.22.99
18.944.53.7
1.29.34.54.5
1.510.36.25.5
212.7127.4

## Z Bending

1) Z Bending Types

• When H is larger than or equal to 5T, calculating as per two 90°bending.
• When H is lower than 5T, one-time forming is enough

2) The main factors that affect the minimum Z bending value are the width of V groove and the distance from the center of the V groove to the edge.

<

p style=”text-align: center;”>   3) Formula: 6T/2+edge distance of V groove +（1.8T/2）+T（see the picture）

For example, in the case of 1.0mm plate, to the edge distance=1.5, then the minimum Z bending H=61/2+1.5+（1.81/2）+1=6.4.

### Would you like to get a quotation from us?

error: Content is protected !!
Scroll to Top

### Get Free Quote

Our sales engineer will reply to your message within 24 hours.

### Get Free Quote

Our sales engineer will reply to your message within 24 hours.

## May I help you?

Fill the form below and we will get back to you shortly!