What is the bending angle of press brake and how is it calculated? Let’s take a look at the following introduction!
Through the electro-hydraulic servo system numerical control level and depth positioning (Y1, Y2 axis), so generally you only need to select the appropriate tool according to the drawing, call the corresponding tool from the system tool library, fill in the material type, material length, thickness, every bending width, angle and other parameters, the system will automatically calculate the plate expansion dimension, R angle, required pressure and bending depth.
Next, just feed the sheet and step on the foot switch.
The relatively high-end system can be programmed by graphics. The system automatically generates two-dimensional or three-dimensional section graphics of the product according to the input data, displays the local material position and tool position, and the solid drawing of the bending workpiece. The bending simulation processing can be carried out, and the entity can follow the display during processing. The whole bending process is very clear and safe.