Hydraulic Press Brake For Sale

We have been producing press brakes for more than 20 years and have rich experience. At the same time, we have established deep relationships with various global technology and parts partners to ensure the stable operation of the press brakes we sell.

Press Brake

NC Press Brake

If you have limit budget, the NC press brake will be a good choice for you to finish sheet metal bending.

Press Brake

CNC Press Brake

CNC press brake has much higher accuracy, efficiency than NC press brake when bending metal plate.

Robotic Press Brake

Robotic Press Brake

Robotic press brake It can efficiently and accurately complete the automatic bending of sheet metal.

How to change the tool of press brake?

Replacement method of the top punch:

Put a piece of wood between the top punch and bottom die and jog the machine to make the punch close to the wood (prevent the punch from falling).

Loosen the tooling clamps (multiple) on the top of the punch and pull out the punches.

Install the new punch, gently tighten the clamps, jog to press the new punch on the wood, and then tighten the clamps (so that there is no gap between the punch and the clamps).

Replacement method of bottom die:

Just loosen the pressure block and then replace the die.

Powered by BetterDocs

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!
Scroll to Top