Press Brake

For sheet metal bending, the press brake is a necessary machine. We have NC type and CNC type press brakes. At the same time, we can customize the punches and dies according to your practical use in sheet metal fabrication.

Shearing Machine

For the straight cutting of steel plate, hydraulic shearing machine is a good choice. It not only has high cutting efficiency, but also requires less investment. We have both swing beam shears and guillotine shears for your selection.

Laser Cutting Machine

In the current metal plate and pipe cutting, laser cutting machine is undoubtedly the best choice. It can not only cut various shapes, but also has small cutting gap, high precision and high cutting efficiency. Today, it is very cost-effective.

Friction Drive

Friction drive is a new friction drive ring composed of friction block and connecting piece.

Friction Drive

The friction blocks are locked together and integrated, which is safe and reliable to use.

The scope of use

The material of the friction block is synthetic fiber, which is composed of light leather, chrome tanned leather and plant fiber, and is composed of anti-wear agent, friction-increasing agent and binder.

The transmission ring has the advantages of wear resistance, temperature resistance, stability and reliability, long service life and low cost, and is an ideal friction transmission ring.

Used for friction transmission, especially for friction drive of friction press, which consists of friction block and connecting piece.

It is characterized in that the friction block is divided into two layers.

The upper and lower layers are connected by connecting pins, and the butt joints of the upper and lower friction blocks are staggered.

The design

The spring is used to press the friction plate and is adjustable for use as a load safety device.

The friction clutch used in the headstock of the machine tool has the function of overload protection.

However, as the friction plates wear out, they need to be adjusted frequently.

It can also simulate the overload protection device of the radial drilling machine.

The structure is that a plurality of dimples are arranged between the two plates, and a steel ball is placed in the middle, which is pressed by an adjustable spring, and can be slipped when the load is large.

The motor reducer is used as the main power, and an overload protection device is installed at the output of the load and the reducer.

Request For Quotation

Want To Buy Equipment For Sheet Metal Bending & Cutting?

If your workshop needs the equipment for steel plate cutting or bending, you can contact us through the button below. Our expert team will provide the most suitable machine according to your practical use within 24 hours.

Leave a Comment

Your email address will not be published.

Hello friend
Before you leave...
I know you must want to say something to us, questions, doubts, requests, etc. Don't miss the opportunity for our experts to reply to your message.
Get In Touch
Your message will be replied within 12 hours.
close-link
Scroll to Top