Fiber Laser Cutting Machine

Fiber Laser Cutting Machine

Factory Direct Sale Without Middleman

We offer fiber laser cutting machines with power range from 1000-12000W, capable of cutting carbon steel up to 30mm and stainless steel up to 45mm

The laser generators and cutting heads are international brands, such as Precitec, Raytools cutting heads, IPG laser source, etc. We also offer economical solutions, such as using Raycus lasers and WSX laser cutting heads made in China. 

In addition, all our machines come with a 3-year warranty.

Some Basics On Precision Of Robot Laser Cutting Machine

The laser cutting technology of series six axis robot and fiber laser can be used to trim and cut holes.

Compared with the traditional open die stamping technology, it shortens the process flow, greatly reduces the labor cost and mold cost, improves the product grade and added value, and is widely used in automobile manufacturing, aerospace industries.

This post mainly analyzes the main factors that affect the cutting accuracy of robot laser cutting machine after off-line programming and provides the corresponding solutions.

Programming mode of robot cutting machine

In recent years, the concept of industry 4.0 is deeply rooted in the hearts of the people, and the development of robot laser cutting machine towards intelligence has become a major trend.

If we want to develop and transform, we need to understand how the robot laser cutting machine completes the established work, and then we need to talk about its programming method.

Generally, the programming methods of serial robot laser cutting machine are mainly divided into teaching programming and off-line programming.

Teaching programming means that the operator’s “eye (observation) + brain (judgment) + hand (record)” will manually walk the end effector along the required track, and store it in the robot controller.

After the robot reads and learns, it will repeat these trajectories.

Its advantages are low threshold, easy to learn and can correct the error caused by mechanical structure.

However, the disadvantages are also obvious, the actual operating environment is needed.

The cutting quality depends on the operator’s experience, and it is not suitable for complex trajectory.

And the machine needs to stop production, which affecting productivity.

Off-line programming is to reconstruct the 3D virtual environment of the whole working scene in the computer through off-line simulation software.

Then, according to the size, shape and material of the parts to be processed, the software can automatically generate the trajectory of the robot with some operations of the software operator, that is, the control command.

Then the trajectory is simulated and adjusted in the software, and the robot program is generated and transmitted to the robot.

The advantage of this method is that it has the functions of trajectory simulation, path optimization and collision detection, and it doesn’t rely on the experience of the operator.

It can be far away from the actual operating environment, and is suitable for complex trajectories.

In addition, there is no need to stop production, improve production efficiency, and overcome many shortcomings of teaching programming.

Comparatively speaking, off-line programming is more suitable for the intelligent development direction of robot laser cutting machine.

However, many users use off-line programming, generally reflect that the cutting accuracy is poor.

Next, we will analyze which factors affect the cutting accuracy after the robot laser cutting machine using off-line programming.

Absolute positioning accuracy error of serial six axis robot

Offline programming needs to import simulation model into computer software.

The model represents the perfect design, and there are no geometric and kinematic errors in the simulation.

However, there are tolerances in the actual processing and assembly of robot parts, and there are also deviations between the encoder feedback value and the actual motion value in the motion process of the joint axis, which leads to errors between the actual position of the end effector and the theoretical target position when the robot executes the instructions given by the off-line programming.

As shown in Figure 1, cutting a straight line from a to B, the offline programming software measures the theoretical length L between AB, and sends the command to the robot controller, but the robot’s own geometric size and motion error only walks L1 in actual execution, and there is a difference △L with the theoretical length, which is the absolute positioning accuracy error of the robot.

absolute positioning difference △L

Fig. 1 absolute positioning difference △L

The series six axis robot generally has the characteristics of high repositioning accuracy (about 0.05mm) and extremely low absolute positioning accuracy (about 3mm difference per meter), which leads to worse geometric dimension accuracy when the robot adopts off-line programming.


(1) modify the part model

For some parts with simple outline and low precision, cut a cuboid as shown in Figure 2.

Firstly, the workpiece coordinate system is parallel to the robot coordinate system, then a solid sample is cut or marked according to the instructions generated by the normal part model, and the difference between the cutting dimension and the target dimension is measured along the workpiece coordinate system.

Then through the 3D modeling software or offline simulation software, the part model is enlarged or reduced along the workpiece coordinate system according to the difference, and the cutting program is regenerated to improve the dimensional accuracy.

the model built when cutting a cuboid

Fig. 2 the model built when cutting a cuboid

(2) the laser tracker compensates the absolute positioning accuracy of the local area of the robot.

For parts with complex contour and high accuracy requirements, laser tracker can be used to compensate the accuracy of the robot end effector in the cutting area, as shown in Figure 3.

laser tracker compensates the absolute positioning accuracy of local area of robot

Fig. 3 laser tracker compensates the absolute positioning accuracy of the local area of robot

Using off-line programming to generate several spherical point positions from a known spherical model. The robot reads and executes.

The laser tracker captures and maps these points, and finally draws the actual spherical model by computer software.

After comparing with the known spherical model by offline programming, the absolute positioning accuracy of the robot in this area is calibrated and compensated.

Error of tool center point TCP

The end effector of the robot, also known as the tool, is installed on the end flange of the robot.

When we let the robot approach a certain point in space manually or programmatically, its essence is to let the tool center point approach the point.

Therefore, it can be said that the trajectory motion of the robot is the motion of the tool center point (TCP).

When the robot leaves the factory, it only knows the coordinates of the center point of the end flange, and the coordinates of the tool center point (TCP) need to be input into the robot controller after teaching.

At present, the center point of the robot tool is generally calculated by four point drawing ball method, as shown in Figure 4.

calculation tool center point TCP

Fig. 4 calculation tool center point TCP

That is to say, taking the center point of the tool as the center of the ball, drawing the sphere by collecting the center points of four different positions of the robot flange, and then calculating the coordinates of the center of the ball, which is the center point of the tool.

Since the position of the ball center is manually calibrated by observing the relative position of TCP and teaching fixture, there is an error between the center point of the tool calculated by this method and the center point of the actual tool, as shown in Figure 5, which is generally about 0.5mm.

there is an error between the calculated tool center point and the actual tool center point

Fig. 5 there is an error between the calculated tool center point and the actual tool center point

In the off-line programming software, there is no error in the tool center.

In the actual cutting of parts, as long as the laser cutting head rotates around the center of the tool, it will produce large size and position deviation.

Use infrared tool calibrator to calibrate tool center point

As shown in Figure 6, there are two orthogonal infrared transmitters and corresponding inductive switches in the circle of the tool calibrator.

TCP correction of tool center point with infrared tool calibrator

Figure 6 TCP correction of tool center point with infrared tool calibrator

By performing a specific calibration procedure, the robot makes the tool move in the calibration circle.

When the robot tool blocks the infrared ray, the corresponding induction switch sends a signal to the robot controller, and finally the controller calculates and judges the position of the tool center point.

After calibration, the TCP accuracy of the tool center point can reach 0.1 mm.

Final thoughts

In addition to the above two main factors, the accuracy of robot laser cutting machine based on off-line programming is also related to the establishment of workpiece coordinate system, the attitude and load of robot, and the fitting degree of the part physical model.

However, the cutting accuracy errors caused by these factors are acceptable to most users, and can also be compensated by the operation experience of personnel to reduce these errors.

In short, in the near future, with the development and deep integration of vision technology, sensing technology, intelligent control, network and information technology, big data and other technologies, the off-line programming technology of robot laser cutting machine will be further developed to intelligence, such as automatic perception, identification and reconstruction of workpiece and processing path, realizing the independent path planning, automatic correction and adaptive environment.

With less and less human intervention, the user’s operation will be simpler and the cutting accuracy will be higher and higher.

Sharing is caring!

Would you like to get a quotation from us?

Leave a Comment

Your email address will not be published. Required fields are marked *

error: Content is protected !!
Scroll to Top

Get Free Quote

Our sales engineer will reply to your message within 24 hours.

Get Free Quote

Our sales engineer will reply to your message within 24 hours.

Before you go ...

May I help you?

Fill the form below and we will get back to you shortly!